REXX Tips & Tricks, Version 2.80

0.9b (c) 1995 Peter Childs

The SYSINSTX command

Use the command SYSINSTX.COM (normally in the directory 
\OS2\INSTALL\BOOTDISK or on the installation disk) to make an OS/2 drive 
or diskette bootable. Note that for using this command on HPFS drives the 
DLL UHPFS.DLL must be in a directory in the <LIBPATH.   

Source:  The OS/2 WARP Survival Guide 

Inf-HTML End Run - Successful